Are you in search of effortless control over your environmental conditions for your projects? Look no further than our SporeBuddies Plug and Play Temperature and Humidity Controller.
Effortless Dual Control:
This dual controller simplifies the task of managing temperature and humidity for your setup. It provides individual control for both a heating mat or heating tube and a humidifier. Just plug your devices into the controller’s sockets, and you’re ready to roll. Out of the box, the temperature and humidity settings are preset to 26-27°C and 90-95% RH (relative humidity), ensuring it’s ready for immediate use upon arrival.
Customized Settings:
If you prefer different settings, it’s a breeze to adjust them to your specific needs. Here’s how:
To Change Temperature Settings:
- To modify the HEAT TURN ON TEMP:
- Press and hold the left arrow until the numbers on the screen flash.
- Use the up and down arrows to set the desired temperature at which the heat source turns on.
- After setting, leave the controller for about 5 seconds, and the sensed temperature will be displayed.
- To adjust the HEAT TURN OFF TEMP:
- Press and hold the right arrow until the numbers on the screen flash.
- Utilize the up and down arrows to select the temperature at which the heat source turns off.
- After setting, leave the controller for about 5 seconds, and the sensed temperature will be displayed.
To Change Humidity Settings:
- For adjusting the HUMIDITY TURN ON SETTINGS:
- Hold down the left arrow until the numbers on the screen flash.
- Use the up and down arrows to set the desired humidity level at which the humidifier activates.
- After setting, leave the controller for about 5 seconds, and the sensed humidity will be displayed.
- To modify the HUMIDITY TURN OFF SETTINGS:
- Hold down the right arrow until the numbers on the screen flash.
- Adjust the humidity level at which the humidifier deactivates using the up and down arrows.
- After setting, leave the controller for about 5 seconds, and the sensed humidity will be displayed.
Specifications:
- Voltage: 240V
- Maximum Load Output: 10A
- Dual-Color Digital Display
- Main Power Lead Length: 2m
- Two Socket Leads: 1m each
- Combined Temperature and Humidity Probe: 1.5m
With a load output capacity of up to 10 amps, this controller accommodates most humidifiers, making it suitable for a wide range of projects, from small boxes to full-room setups.
Choose the SporeBuddies Plug and Play Temperature and Humidity Controller for precise and hassle-free environmental control.
Mia T. (verified owner) –
Excellent customer service! Quick and friendly assistance. Fast delivery and a seamless payment process. The entire experience was smooth and enjoyable. Highly recommended for their commitment to customer satisfaction!
Ethan R. (verified owner) –
Impressed with the outstanding customer service. Quick and helpful responses, coupled with fast delivery and a seamless payment process. A top-notch experience from start to finish.
Ella Johnson (verified owner) –
Top-notch service! Quick responses, friendly assistance, and fast delivery. Payment process was a breeze. Truly a hassle-free and delightful experience. Will be a loyal customer for sure.